Enable Your Project with LED Drivers by eldoLED

Want this checklist?

Download Now!

  • Flicker: No Visible Flicker or Stroboscopic Effects


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • No visible or perceivable flicker over dimming range
    • No stroboscopic effect when filming (camera)
    • Complies with IEEE Standard P1789-2015 (IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers), in typical operating conditions at representative dimming levels.
    • Addresses requirements of: California Title 24
    • Complies with NEMA 77 standard at all dimming levels (ANSI C82.18 - 2022)
    • Complies with NEMA 77 standard at all dimming levels (ANSI C82.18 - 2022)

  • Dimming :​ Range and Quality Equivalent to Incandescent Dimming


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • Dimming range from 100 to 0.1% or from 100 to 1% or from 100 to 5%
    • Complies with: NEMA - ANSI C137.1-2022; ESTA E1.3 (Analog 0-10V), ANSI E1.11-2008 (R2018), ESTA DMX 512, USITT
    • Addresses requirements of: California Title 24, ENERGY STAR®
    • Dimming range from 100 to 10%
    • Spec: Complies with: NEMA - ANSI C137.1-2022; ESTA E1.3 (Analog 0-10V)
    • Dimming range from 100 to 10%
    • Spec: Complies with: NEMA - ANSI C137.1-2022; ESTA E1.3 (0-10V Analog Control)

  • Controls Interface Supported: A Choice of Control Protocols to Cover Any Lighting Controls and Network Needs​​


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • Supports analog 0-10V OR D4i OR nLight OR SensorSwitch
    • Programmable auxiliary outputs compatible with wide range of sensors and wired or wireless controls devices
    • Supports analog 0-10V OR D4i OR nLight OR SensorSwitch  
    • Programmable auxiliary outputs compatible with wide range of sensors and wired or wireless controls devices.
    • Supports analog 0-10V OR D4i OR Cell Connect OR DMX OR nLight OR SensorSwitch
    • Programmable auxiliary outputs compatible with wide range of sensors and wired or wireless controls devices.

  • Dynamic Lighting - Tunable and Color​: Ability to Adjust Color Temperature Over Customized Range. Smooth Transitions Between Intensity Levels and Color. Color Consistency in the Space


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • Supports Tunable White with DALI-2 OR DMX OR nLight
    • Supports architainment RGBx with DMX
    • Ability to adjust color temperature over customized range.
    • Provides smooth transitions between intensity levels and color.
    • Provides color consistency in the space  
    • Not Applicable 
    • Supports RGBx and RGBW with DMX  

  • Consistent Behavior at Start Up/Shut Down: All Luminaires within a Space to have the Same Behavior at On and Off ​


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • No perceived timing difference at turn on, turn off and over dimming range
    • Addresses requirements of California Title 24
    • No perceived timing difference at turn on, turn off and over dimming range
    • No perceived timing difference at turn on, turn off and over dimming range

  • No Electromagnetic Interference: No Unwanted Radiated or Conducted Interference in the Space​


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • Complies with FCC title 47 part 15 class A & B
    • Complies with FCC title 47 part 15 class A
    • Complies with FCC title 47 part 15 class A

  • Surge & EFT Protection: Guard Against Failure


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • 2.5kV common and differential mode surge protection for indoor applications, complies with ANSI C62.41 Test Severity III - Cat A (ANSI C82.77-5-2017 Surge and Transient Standard)
    • 6kV common and differential mode surge protection for industrial applications, complies with ANSI C62.41 Test Severity III - Cat B (ANSI C82.77-5-2017 Surge and Transient Standard)
    • 6kV common and differential mode surge protection for outdoor applications, complies with ANSI C62.41 Test Severity III - Cat B (ANSI C82.77-5-2017 Surge and Transient Standard)

  • Additional Features ​


    Indoor

    Industrial/ Demanding Environments

    Outdoor
    • Configurable Thermal Protection for added safeguard based on known operating condition and luminaire design
    • Ingress Protection: IP20 rated driver enclosure
    • Standby power < 0.5W - Low power consumption as luminaire is set to (electronic) off
    • Environmental standards: complies with RoHS3, REACH Art 33, Living Building Challenge™ Red List exemption
    • Configurable Thermal Protection for added safeguard based on known operating condition and luminaire design
    • Ingress protection: IP66 rated driver enclosure
    • Standby power < 1W - Low power consumption as luminaire is set to (electronic) off
    • Environmental standards: complies with RoHS3, REACH Art 33, Living Building Challenge™ Red List exemption
    • Configurable Thermal Protection for added safeguard based on known operating condition and luminaire design
    • Ingress protection: IP66 rated driver enclosure
    • Standby power < 1W - Low power consumption as luminaire is set to (electronic) off
    • Environmental standards: complies with RoHS3, REACH Art 33, Living Building Challenge™ Red List exemption